Condition is a Pre-Stain conditioner that helps properly prepare wood surfaces absorb the stain evenly.
CONDITION APPLICATION INSTRUCTIONS
Surfaces must be clean, dry, and sound.
1. Remove any wax from surface with mineral spirits.
2. Sand bare wood as smoothly as possible and remove all sanding dust. This is an important preparation step and should not be overlooked, since the smoothness of the final finish is determined by the smoothness of the surface.
3. Previously applied wood stains must be completely dry. Previously applied finishes must be clean and tightly adhered, Brush or wipe on and allow to dry. Sand with 400 grit sandpaper between coats.
We Recommend using Condition with our Miss Lillian’s Gel Stain products!